2012 DAF CF 410 FAD 8x4 Day Cab, Grab Loader, Steel Body, Epsilon M125 Crane
32 ton 2012 DAF CF410 FAD 8x4 rigid, Day cab.
Thompson Loadmaster steel body C/w Electric sheet system.
Epsilon M125 LC82 grab crane, Dual stand up controls, Kinshoffer clam bucket, with new edges.
New TH White crane test and inspection 125% overload test completed.
Clean and tidy inside.
Good tyres all round.
Roof beacon bar.
Under body steel tool box.
Ready for work.
- In Stock
- Crane load test by TH White
- MOT until April 2018
- Inhouse finance packages available
- 292,154 KMs
|Make / Model||
DAF CF410 Euro 5 FAD 8x4 Rigid Construction
|Engine size & output:||
MX-11, 6 cylinder diesel engine, 11 litres output 410 hp, Basic engine immobilizer system
Manual 8 speed, manual overdrive gearbox type 8S220, ratio 11.54-0.84, 8 speeds.
SCR unit, located at the right-hand side of the chassis vertical tailpipe behind cab, 340 alloy fuel tank, No Spray suspression fitted. Chassis paint finsihed in Grey,- AdBlue tank 50 litres at the left-hand side of the chassis
|Wheels & Tyres:||Front axles: tyre size 295/80R22.5, wheel size 22.5 x 8.25. Rear drive axles: tyre size 295/80R22.5, wheel size 22.5 x 8.25.|
|Brake System:||Ventilated disc brakes at front, rear tandem axle with drum brakes. Dual circuit air system with electronic control (EBS), Exhaust brake, Mechanical differential lock|
|Axles & Suspension:||
Two front axles, type 156N. I bean section bean Max. load 2 x 7.1 tonnes.- Rear trapezium leaf suspension. Double driven tandem axles type SR1132 with single reduction. Max. load 2 x 9.5 tonnes. Mechanical cross-axle and inter-axle differential locks.
Day Cab with galvanized steel bumper, tinted glass and electric window openers. Main mirrors and wide angle mirrors electrically heated. Cab width 2300 mm , Mechanical cab suspension, - Translucent external sun visor, Rear cab window,
High backed seat air suspended driver seat, Automatic Temperature Control (ATC) and air conditioning,- Basic radio & CD player. Speaker system with 2 speakers. Cruise control, Tinted glass, Electric windows
Thompson loadmaster 13 m3 cubic meter Double skin body built for the hardest of all work 5mm Hardox 450 flat floor, Fixed sides. Access steps fitted to O/s side of the body. Front bulkhead shovel and rack. 2nd steer and rear axle mud wing are made from mild steel.3 tar hatches. Body finished in black
EDBRO TS series. The high tensile steel stabilising frame within the TS effectively absorbs side loads imposed by the chassis during tipping whilst protecting the cylinders from side load. With 50% more torsional stiffness than comparable units, the TS provides ultimate stability for the safest tipping in even the most demanding operating conditions
B 4 Palfinger Epsilon M125 LC82 crane. Dual stand up controls with cable controls on drivers side. Double access catwalk and platform finished in black. Double boom extension with BK057 4.5t rotator, Kinshoffer KM602 500L clam bucket with lifting hooks, Two fixed stabiliser legs, Main cylinder protection guard, rubber bump strip on outer boom. 2 spot lights Emergency stop, load hold valves,On the main cylinder. Rated capacity indicator with LED for 50% 75% and 100%. Invisible safety case around the operators position, The crane is finished in KTL primer and painted in RAL 3020 red powered coating
|Additional items fitted :||
HELLA 4' Xeon amber roof mounted beacon