Available Models
Choosing a Skip Loader
Specifying the chassis
Our skip loaders are built on the DAF XBC 260, an 19-tonne 4×2 rigid that suits 18-tonne skip equipment like the Boughton PR18. The PX-7 6.7-litre engine produces 257 hp, with 990 Nm of torque from 1,000 rpm. That low-rev pull matters on a collection round, where the truck spends its day stopping, lifting and pulling away loaded rather than cruising.
If the last DAF you drove was an LF with the 6-speed manual or the AS Tronic, the XBC’s 8-speed PowerLine automatic will feel like a different truck. Both older gearboxes worked through a clutch, so every gear change opened it and drive was briefly lost. PowerLine has no clutch to open. It hands over from one gear to the next without losing drive, so the truck keeps pulling through every change.
With eight gears instead of six, the steps between them are smaller too. Changes are quick and smooth, and feel much more like driving a car. On a skip round of junctions, traffic lights, tight streets, customers’ driveways and stop-start work all day, that is exactly what the driver needs.
The chassis comes with a gearbox PTO already fitted, driving the skip loader’s hydraulic pump directly. A rear-view camera, kerb-view mirror and front-view mirror help in the tight yards and residential streets where skips are usually placed.
Boughton Power-Reach Body
The body is Boughton’s Power-Reach PR18, designed for operation at 18,000 kg GVW. Independent telescopic lift arms extend to reach a skip that isn’t sitting squarely behind the truck, and pneumatic tip hooks are powered both up and down for controlled tipping. Heavy duty walk-on guards protect the lift cylinders from knocks.
Multi-position front and side skip stops locate skips of different sizes and hold them steady on the road. Independent telescopic stabiliser legs, with pad or roller feet, keep the truck stable while it lifts. Operation is from ground-level, hold-to-run multi-lever controls, and a fast off-load setting speeds up handling empty skips.
We fit the Intracova sheeting system as standard. It loads and sheets within UK maximum vehicle width rules and is controlled from the same operating station, so covering a load doesn’t mean climbing onto the body.
Built For
Applications
- Delivering and collecting hired skips
- Clearing construction and demolition waste
- Removing domestic and garden waste
- Working tight urban and residential streets
- Returning empty skips quickly between jobs
Sectors Served
- Skip hire operators
- Waste management companies
- Local authorities
- Construction and demolition contractors
- Recycling and materials recovery firms
Common Questions
We quote every skip loader on its own specification, because the options, livery and sheeting you choose all affect the price. Tell us how you will use the truck and we will send a full quotation for the DAF XBC 260 with Boughton skip equipment.
The time from order to delivery depends on chassis availability and the build slot for the skip equipment. Our team will confirm a delivery date for your specification when we quote.
Yes. We fit the Intracova sheeting system as standard on our Boughton skip loaders. It sheets the load within UK maximum vehicle width rules and is operated from the main control station at ground level.
Yes. We can arrange finance on a new skip loader, with terms set around your business and budget. Ask our team about the options when you request a quote, and we will include them alongside the price.
The DAF chassis is supplied with DAF Warranty Plus, which covers the complete vehicle for one year and the driveline for three years, with breakdown cover included. Additional DAF service packages are available at extra cost.
The Boughton body has easy access panels for the hydraulic tank and main valve chest, which keeps routine checks quick.